CDO Operators
CDO Roller Shutter Operators
The CDO openers are a range of Roller Shutter Operators that provide various options for door solutions with high-use applications. Available in both Flange and Footmount the openers can be applied with Low Level and High Level mechanisms to suit your installation. The handling of the operator can also be left or right side depending on where it needs to be wired.
Please Note: All operators shown below must be used in conjunction with Safety Brakes.
CDO 100B Flangemount with 1 and 3 phase options.
CDO 200 Flangemount with 1 and 3 phase options.
CDO 375s Footmount with 3 phase motor.
CDO 100 Flangemount with 1 and 3 phase options.
CDO 275 Flangemount with 3 phase motor.
CDO 400 Flangemount with 3 phase motor.
CDO 150 Flangemount with 3 phase motor.
.jpg)
CDO 300 Flangemount with 3 phase motor.
CDO 400s
CDO 400s Footmount with 3 phase motor.
Motor Descriptions
Motor Descriptions | Prewire Codes | ||
WGI or GB | Hook on, High Level Handchain Overide System | HLM | High Level Mechanical Limit (MLS) Built On Starter, Prewired |
FLM or KE | Floor Level Handchain Overide System (30mm Kits 9m, 40/50mm, 11m) | LLM | Low Level Mechanical Limit (MLS) Starter, Prewired 6m 12C SY |
HCR or KU | Handcrank Overide System | HLE | High Level Electronic Limit (AWG) Built On Starter, Prewired |
AWG | Electronic Limits | LLE | Low Level Electronic Limit (AWG) Starter, Prewired 6m 12C SY |
MLS | Mechanical Limits |
Discover More
Discover more about the CDO Operators in our online datasheets: